Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering,
S.-H. Joo, H. Kato, M.J. Jang, J. Moon, E.B. Kim, S.-J. Hong, H.S. Kim,
Journal of alloys and compounds 698 (2017 Mar 25) 591-604
Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy,
S.-H. Joo, H. Kato,M.J. Jang,J. Moon,C.W. Tsai,J.W. Yeh,H.S. Kim ,
Materials science & engineering. A, Structural materials : properties, microstructure and processing 689 (2017
Mar 24) 122-133
Effect of B2-ordered phase on the deformation behavior of Ti-Mo-Al alloys at elevated temperature,
Lu, YY ; Yamada, JP; Nakamura, J ; Yoshimi, K ; Kato, H ,
Journal of Alloys and Compounds 696 (2017 Mar 5) 130-135
MnFeNiCuPt and MnFeNiCuCo high-entropy alloys designed based on L10 structure in Pettifor map for binary compounds,
Takeuchi, A., Wada, T., Zhang, Y. , Intermetallics 82 (2017 Mar) 107-115
Three dimensional analysis of nanoporous silicon particles for Li-ion batteries,
Roiban, L ; Koneti, S; Wada, T; Kato, H ; Aires, FJCS; Curelea, S; Epicier, T; Maire, E ,
Materials Characterization 124 (2017 Feb) 165-170
Mechanical Properties and Biocompatibility of the Ti-Based Low-Alloys Minor Alloying by the Noble Metals,
Zadorozhnyy, VY ; Shi, XT; Wada, T ; Kato, H; Louzguine-Luzgin, DV,
Nano Hybrids and Composites 13 (2017 JaN) 63-68
High aspect ratio grating by isochronal imprinting of less viscous workable Gd-based metallic glass for neutron phase imaging,
Sadeghilaridjani, M ; Kato, K ; Shinohara, T ; Yashiro, W ; Momose, A ; Kato, H ,
Intermetallics 78 (2016 Nov) 55-63
A novel method of surface modification by electrochemical deoxidation: Effect on surface characteristics and initial bioactivity of zirconia,
Liu, J., Hong, G.,Wu, Y.-H., Endo, K.,Han, J.-M., Kumamoto, H., Wada, T., Kato, H., Gao, P., Sasaki, K.,
Journal of Biomedical Materials Research - Part B Applied
Biomaterials 105(8) (2016 Oct) 2641-2652
Enlarging the surface area of an electrolytic capacitor of porous niobium by Mg-Ce eutectic liquid dealloying,
Kim, JW; Wada, T; Kim, SG; Kato, H ,
Scripta Materialia 122 (2016 Sep) 68-71
Evolution of a bicontinuous nanostructure via a solid-state interfacial dealloying reaction,
Wada, Takeshi; Yubuta, Kunio; Kato, Hidemi,
Scripta Materialia 118 (2016 Jun) 33-36
Enhanced Wear Resistivity of a Zr-based Bulk Metallic Glass Processed by High-Pressure Torsion Under Reciprocating Dry Conditions,
Joo, SH; Pi, DH; Guo, J ; Kato, H; Lee, S; Kim, HS,
Metals and Materials International 22(3) (2016 May) 383-390
Ti-Ag-Pd alloy with good mechanical properties and high potential for biological applications,
Zadorozhnyy, VY; Shi, X; Gorshenkov, MV; Kozak, DS; Wada, T; Louzguine-Luzgin, DV ; Inoue, A; Kato, H ,
Scientific Reports 6 (2016 Apr 28) 25142
X-ray phase imaging using a Gd-based absorption grating fabricated by imprinting technique,
Yashiro, W ; Kato, K ; Sadeghilaridjani, M ; Momose, A ; Shinohara, T; Kato, H,
Japanese Journal of Applied Physics 55(4) (2016 Apr) 48003
High-Entropy Alloys Including 3d, 4d and 5d Transition Metals from the Same Group in the Periodic Table,
Takeuchi, A ; Amiya, K ; Wada, T ; Yubuta, K,
Materials Transactions 57(7) (2016) 1197-1201
Early Science Commissioning Results of the Sub-micron Resolution X-ray Spectroscopy Beamline (SRX) in the Field of Materials Science and Engineering ,
Chen-Wiegart, YCK ; Williams, G ; Zhao, CH ; Jiang, H ; Li, L; Demkowicz, M ; Seita, M; Short, M ; Ferry, S; Wada, T; Kato, H ; Chou, KW ; Petrash, S; Catalano, J ; Yao, Y; Murphy, A; Zumbulyadis, N; Centeno, SA; Dybowski, C; Thieme, J,
AIP conference proceedings 1764 (2016) 30004
Selective growth of silver particles on the facets of synthetic diamond,
Bokhonov, B. B.; Kato, H.,
Crystengcomm 18-39 (2016) 7430-7434
Formation of porous layer with low Ni content on NiTi substrate by dealloying in metallic melts,
Kyosuke UEDA, Ryuma HASHIMOTO, Masahiro HIROHASHI, Takeshi WADA, Hidemi KATO, Takayuki NARUSHIMA ,
粉体および粉末冶金 63(8) (2016) 766-770
Zr-Cu-Ni-Al 系金属ガラスの塑性変形挙動に及ぼす貴金属添加の影響,
山崎 徹, 山田 昌弘, 藤田 和孝, 加藤 秀実, Do Hyang Kim ,
粉体および粉末冶金 63(4) (2016) 230-238
2017/Mar/30 Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development 2nd Meeting Aichi・Nagoya Univ.
M2/Park, Poster「Graphitization and Activation of Open-Cell Type Porous Carbon Prepared by Dealloying in Metallic Melt」
M2/Datekyu, Poster「Pd基金属ガラスを用いた高アスペクト比回折格子の作製技術の確立」
Asst.Prof.Joo, Poster「Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy」
2017/Mar/21-22 2017 Annual Meeting of Excellent Graduate Schools for Materials Integration Center and
Materials Science Center in conjunction with 2017 Russia-Japan Conference Avanced Materials Sendai・Akiu
M2/Park, Poster「Graphitization and activation of open-cell type porous carbon prepared by dealloying inmetallic melt」
M2/Datekyu, Poster「Optimizing imprinting condition for high aspect grating of Pd-based metallic glass」
2016/Nov/24-Dec/2 2016 MRS Fall Meeting & Exhibit USA・Boston
PD/Lu, Oral「High Temperature Deformation Behavior of Ti-Mo-Al Ternary Alloys Containing Ordered B2 Phase」
2016/Nov/20-22 4th Research on multiscale creation of green energy materials MIyagi・South Sanriku
PD/Lu, Oral「Microstructure and Mechanical Properties of Ti-Mo-Al Based Alloys」
2016/Oct/30-Nov/4 2016 Russia-Japan Conference Advanced Materials: Synthesis, Processing and Properties of Nanostructure Russia・Novosibirsk
M2/Park, Poster「Graphitization and Activation of Open-Cell Type Porous Carbon Prepared by Dealloying in Metallic Melt」
D1/Liang, Poster「Magnetic properties of nanocrystalline Fe83.3Si4B8P4Cu0.7 cores processed with two-step annealing method」
2016/Oct/17-18 Visual-JW2016 Osaka
M2/Datekyu, Poster「Optimizing Imprinting Condition for High Aspect Grating of Pd-Based Metallic Glass」
M2/Park, Poster「Graphitization and Activation of Open-Cell Type Porous Carbon Prepared by Dealloying in Metallic Melt」
M2/Morishita, Poster「Preparation of Porous Metal by Dealloying in Metallic Melt and its Application to the Binder-Free Cathode for Rechargeable Li-Air Battery」
Assoc.Prof.Wada, Poster「Preparation of 3D Nanoporous Si by Dealloying in Metallic Melt and its Application of Lithium Ion Rechargeable Battery Negative Electrode」
2016/Sep/21-23 The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting Osaka・Osaka Univ.
M2/Saito, Poster「単結晶前駆合金の金属溶湯脱合金化反応およびポーラス構造発達過程」
M2/Yamada, Oral「金属溶湯脱成分法により作製したドープナノポーラスSiの形態とリチウムイオン電池性能との関係」
M2/Park, Oral「金属溶湯脱成分法を用いて作製したオープンセル型ポーラス炭素と黒鉛化および賦活処理に伴う特性変化」
Assoc.Prof.Wada, Oral「固相脱合金化反応に及ぼす前駆合金組成の影響」
2016/Sep/1 IMR - Research Organization for Nano & Life Innovation Waseda Univ.Memorial symposium Sendai・IMR
M2/Yamada, Poster「金属溶湯脱成分法により作製したドープナノポーラスSi の形態とリチウムイオン電池性能との関係」
2016/Aug/28-Sep/2 5th International Workshop on Titanium Aluminides Tokyo・Tokyo Institute of Technology
PD/Lu, Oral「Phase Equilibria, Microstructural Evolution and Mechanical Properties of Ti-Al-C and Ti-Al-Mo-C Alloys」
2016/Aug/1-5 9th Pacific Rim International Conference on Advanced Materials and Processing(PRICM9) Kyoto
PD/Lu, Oral「Reinforcement of Ti-Mo-Al alloys by TiC particles」
2016/Jul/15-24 Beyond Nickel-Based Superalloys II England・Cambridge
PD/Lu, Oral「Microstructure and mechanical behavior of TiC-reinforced Ti-Mo-Al alloys」
2016/Jul/8 Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development kick off meeting Aichi・Nagoya Univ.
Assoc.Prof.Wada, Oral「金属溶湯脱成分法を用いたオープンセル型ポーラス金属の開発」
Prof.Kato, Oral「過冷却液体状態での粘性加工を用いた金属ガラス部材の開発」
2016/Jul/3-8 23th International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM2016) Nara
D1/MOKHTARI, Poster「Microstructure characterization along the process of nanoporous metal made by alloying in metalic melt bath by Xray tomography and SEM-EBSD」
PD/Yu, Poster「Three-Dimensional bicontinuous porous carbon generated in low temperature metallic liquid」
PD/SADEGHILARIDJANI, Poster「High aspect ratio Gd-based metallic glass rating for neutron phase grating interferometer fabricated by imprinting technique」
PD/Lu, Poster「Effect of carbides and oxides on the microstructure and mechanical properties of Ti-Mo-Al alloys」
Asst.Prof.Joo, Oral「Structure and properties of ultrafine-grained CoCrFeMnNi high entropy alloys produced by mechanical alloying and spark plasma sintering」
Assoc.Prof.Wada, Oral「Preparation of nanoporous less noble metals by solid-state interfacial dealloying reaction」
2016/May/18-20 Summit of Materials Science(SMS2016) Sendai・IMR
M2/Yamada, Poster「Preparation of doped-nanoporous silicon by dealloying in metallic melt and its application to the negative electrode for lithium-ion batteries」
D1/Liang, Poster「Magnetic properties of nanocrystalline Fe83.3Si4B8P4Cu0.7 cores processed with two-step annealing method」
FY 2016 Invited lecture
2016/Dec/20 Prof.Kato Tohoku Bureau of Economy,Trade and Industry.Innnovation Seminar Sendai 「ナノポーラス金属の革新的新製造プロセス」
2016/Nov/18 Prof.Kato The Society of Materials Science(JSMS) 39th Committee on Metallic Glasses Yamaguchi・National Institute of Technology, Ube College 「金属溶湯中の脱成分現象を利用した金属ガラス複合材料の作製とポーラス金属への応用」
2016/Oct/30-Nov/4 Assoc.Prof.Wada 2016 Russia-Japan Conference Advanced Materials: Synthesis, Processing and Properties of Nanostructure Russia・Novosibirsk 「Preparation of nanoporous base metals by dealloying in metallic melt and their application for energy related materials」
2016/Oct/11-12 Prof.Kato The Society of Materials Science(JSMS) 2nd Material Week Kyoto 「金属溶湯中の脱成分現象を用いた金属ガラス複合材料の作製とポーラス金属開発への展開」
2016/Sep/23-27 Prof.Kato Second International Symposium on Nanoporous Materials by Alloy Corrosion Germany・ Nohfelden-Bosen 「Recent progress on liquid metal dealloying(LMD) in Tohoku Univ.」
2016/Sep/21-23 Prof.Kato The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting Osaka・Osaka Univ. 「金属ガラスのナノスケール不均質性と機械的性質」
2016/Sep/21-23 Prof.Kato The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting Osaka・Osaka Univ. 「金属溶湯脱成分法を用いたポーラス卑・半金属の作製とそのエネルギーデバイスへの応用」
2016/Sep/4-9 Prof.Kato LAM-16(The 16th International Conference on Liquid and Amorphous Metals) Germany・Bonn 「High aspect grating by imprinting metallic glasses with less viscous workability」
2016/Aug/1-5 Prof.Kato 9th Pacific Rim International Conference on Advanced Materials and Processing(PRICM9) Kyoto 「High aspect ratio grating by imprinting Gd-based metallic glass with less viscous workability」
2016/Jul/3-8 Prof.Kato 23th International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM2016) Nara 「Reaction Design for Mg-Based Metallic Glass with In Situ Ti Dispersoids, and Its Development to Macro-Porous Base/Half Metals」
FY 2016 Awards
2017/Mar/23 M2/Yamada Dean's Award of Tohoku University Graduate School of Engineering
2016/Nov/24 M2/Saito The 132th IMR Autumn Lecture Meeting Best Poster Award
2016/Nov/3 D1/Liang 2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructures The Best Oral Presentation
2016/Nov/3 M2/Park 2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructures The Best Oral Presentation
2016/Sep/21 M2/Saito The Japan Institute of Metals and Materials Best Poster Award
2016/Aug/4 PD/Guo Excellent Poster Award for Young Scientist 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 9)
2016/Jul/7 D1/MOKHTARI ISMANAM2016 Outstanding Poster Award
FY 2015
FY 2015 Paper
Dual HCP structures formed in senary ScYLaTiZrHf multi-principal-element alloy,
Takeuchi, A ; Amiya, K ; Wada, T ; Yubuta, K,
Intermetallics 69 (2016 Feb) 103-109
Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode,
Wada, Takeshi; Yamada, Junpei; Kato, Hidemi,
Journal of Power Sources 306 (2016 Feb 29) 8-16
Three-dimensional bicontinuous porous graphite generated in low temperature metallic liquid,
Yu, SG; Yubuta, K ; Wada, T; Kato, H ,
Carbon 96 (2016 Jan) 403-410
Alloy design for high-entropy alloys based on Pettifor map for binary compounds with 1:1 stoichiometry,
Takeuchi, A; Amiya, K ; Wada, T ; Yubuta, K ,
Intermetallics 66 (2015 Nov) 56-66
Development of a high-damping NiTi shape-memory-alloy-based composite,
Guo, Wei; Kato, Hidemi
Materials Letters 158 (2015 Nov 1) 1-4
The study on interface and property of TiNb/Zr-based metallic glassy composite fabricated by SPS,
Chu, ZH ; Yuan, GY ; Kato, H; Xie, GQ ; Yan, DR ,
Journal of Non-Crystalline Solids 426 (2015 Oct 15) 83-87
Development and microstructure optimization of Mg-based metallic glass matrix composites with in situ B2-NiTi dispersoids,
Guo, Wei; Kato, Hidemi,
Materials & Design 83 (2015 Oct 15) 238-248
The effect of size and volume fraction of the reinforcement on mechanical property and deformation mechanism of the bulk metallic glassy composite,
Chu, ZH; Yuan, GY; Kato, H ; Xie, GQ ; Yan, DR,
Journal of Alloys and Compounds 644 (2015 Sep 25) 25-29
Bulk metallic glasses based on precious metals: Thermal treatments and mechanical properties,
Cardinal, S ; Qiao, J; Pelletier, JM; Kato, H ,
Intermetallics 63 (2015 Aug) 73-79
Submicron-porous NiTi and NiTiNb shape memory alloys with high damping capacity fabricated by a new top-down process,
Guo, Wei; Kato, Hidemi,
Materials & Design 78 (2015 Aug 5) 74-79
Insight on the process ability of bulk metallic glasses by thermo-mechanical analysis and dynamic mechanical analysis,
Qiao, JC; Cardinal, S; Pelletier, JM ; Kato, H ,
Journal of Alloys and Compounds 628 (2015 APR 15) 357-363
Investigation of structure-mechanical properties relations of dual-axially forged Ti-based low-alloys,
Zadorozhnyy, VY; Shchetinin, IV ; Zheleznyi, MV; Chirikov, NV; Wada, T; Kato, H; Louzguine-Luzgin, DV ,
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 632 (2015 APR 24) 88-95
Work-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure Torsion,
Joo, SH ; Pi, DH ; Setyawan, ADH ; Kato, H ; Janecek, M ; Kim, YC; Lee, S; Kim, HS,
Scientific Reports 5 (2015 APR 23) 9660
Surface Improvement for Biocompatibility of Ti-6Al-4V by Dealloying in Metallic Melt,
Fukuzumi, Y., Kato, H.,
Interface Oral Health Science 2014 (2015) 93 - 101
FY 2015 Presentation
2016/Mar/23-25 The Japan Institute of Metals and Materials (JIM) Annual Spring Meeting Tokyo・Tokyo University of Science
M1/Yamada, Poster「金属溶湯中脱成分法によるドープナノポーラスSiの作製とそのLIB負極特性」
D3/Yamazaki, Oral「Gd-Co二元系非晶質合金におけるβ緩和挙動の合金組成依存性」
D3/SADEGHILARIDJANI, Oral「Imprinting less viscous workable Gd-based metallic glass grating for neutron phase imaging」
PD/Lu, Oral「Microstructure Characterization and Mechanical Behavior of Particulate Reinforced Ti-Mo-Al Alloys」
Asst.Prof.Wada, Oral「固相脱合金化反応によるナノポーラス鉄合金の作製」
Prof.Kato, Oral「金属溶湯中での脱成分現象を利用した金属ガラス複合材料の作製とポーラス材料への展開」
2015/Oct/13-15 The Society of Materials Science(JSMS) 1st Material Week Kyoto
D3/Guo, Oral「Development of in-situ β-Ti reinforced Ti-Zr-Cu-Pd-Sn-Mo bulk metallic glass matrix composites」
2015/Sep/29-Oct/6 International Conference on Functional Materials for Frontier Energy Issues(ICFMFEI2015) Russia・Novosibirsk
D3/Yu, Oral「Three-Dimensional Bicontinuous Porous Graphite Generated in Low Temperature Metallic Liquid」
2015/Sep/16-18 The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting Fukuoka・Kyusyu Univ.
M2/Nakamura, Oral「金属溶湯脱成分法を用いた多孔質ニッケルの形態制御とその触媒性能への影響」
M2/Liang, Oral「Core loss properties of soft magnetic Fe83.3Si4B8P4Cu0.7 ribbons treated with the two-step annealing method」
D3/Yamazaki, Oral「希土類系高エントロピー金属ガラスにおけるβ緩和」
Asst.Prof.Wada, Oral「金属溶湯デアロイングにより作製したナノポーラスシリコンのリチウムイオン電池電極特性と電極体積変化の関係」
2015/Jul/13-17 22th International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM2015) France・Paris
D3/Yamazaki, Poster「Observation of hidden β-relaxation in Zr-based metallic glasses by differential scanning calorimetry」
D3/SADEGHILARIDJANI, Oral「Imprinting metallic glass grating for X-Ray grating interferometers」
Asst.Prof.Wada, Oral「Preparation of nanoporous silicon by dealloying in metallic melt and its application to the negative electrode for lithium-ion batteries」
2015/May/29 Tohoku Univ. New Technology Presentation Meetings Tokyo
Prof.Kato, Oral「生体金属材料表面より有毒元素を選択的に除去する技術」
2015/May/26-28 Japan Society of Powder and Powder Metallurgy Spring meeting(115th) Tokyo・Waseda Univ.
D3/Yamazaki, Oral「示差走査熱量測定によって観測したZr基金属ガラスにおける隠れたβ緩和」
D3/Guo, Oral「Development of in situ B2-NiTi Reinforced Mg-based Bulk Metallic Glass Mmatrix Composites」
Prof.Kato, Oral「SUS316L表面からの脱ニッケル処理」
FY 2015 Invited lecture
2015/Nov/4-6 Prof.Kato 3rd International Defense Nano Technology Application Center(DNTAC) Korea・Yonsei Univ. 「Dealloying by Metallic Melt」
2015/Sep/29-Oct/6 Prof.Kato International Conference on Functional Materials for Frontier Energy Issues(ICFMFEI2015) Russia・Novosibirsk 「Nanoporous Metals by Dealloying in Metallic Melt and Their Application for Energy Devices」
2015/Sep/18-25 Prof.Kato Amorphous and Nanostructural Magnetic Materials (ANMM2015) Romania・Iasi 「ON PROCESSING CONDITION FOR METALLIC GLASS WITH LOW VISCOUS WORKABILITY」
2015/Sep/1-3 Prof.Kato 2015 EMN Spain Meeting Spain・San Sebastian 「Nanoporous Metals by Dealloying in Metallic Melt」
FY 2015 Awards
2016/Mar/23 Prof.Kato 74th The Japan Institute of Metals and Materials Meritorious Award
2016/Nov/25 M2/Nakamura The 130th IMR Autumn Lecture Meeting Poster Award
2015/Sep/10 D3/Guo Tohoku University Professor Fujino Incentive Award
2015/May/26 D3/Yamazaki Japan Society of Powder and Powder Metallurgy Spring meeting 2015 Best Presentation Award
Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors,
Kim, JW ; Tsuda, M ; Wada, T; Yubuta, K ; Kim, SG; Kato, H,
Acta Materialia 84 (2015 Feb 1) 497-505
The effect of matrix fracture toughness on the plastic deformation of the metallic glassy composite,
Chu, ZH ; Yuan, GY ; Kato, H ; Xie, GQ ; Yan, DR,
Journal of Alloys and Compounds 612 (2014 Nov 5) 10-15
High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams,
Takeuchi, A ; Amiya, K; Wada, T ; Yubuta, K; Zhang, W,
Jom 66(10) (2014 Oct) 1984-1992
Impact of the structural state on the mechanical properties in a Zr-Co-Al bulk metallic glass,
Qiao, JC ; Pelletier, JM ; Esnouf, C ; Liu, Y ; Kato, H ,
Journal of Alloys and Compounds 607 (2014 Sep 15) 139-149
Bulk-Nanoporous-Silicon Negative Electrode with Extremely High Cyclability for Lithium-Ion Batteries Prepared Using a Top-Down Process,
Wada, T; Ichitsubo, T ; Yubuta, K ; Segawa, H ; Yoshida, H; Kato, H,
Nano Letters 14(8) (2014 Aug) 4505-4510
Correlation between the Enhanced Plasticity of Glassy Matrix Composites and the Volume Fraction, Size and Intrinsic Mechanical Property of Reinforcements,
Z.H. Chu, Hidemi Kato, Guo Qiang Xie, D.R. Yan, Guang Yin Yuan ,
Materials Science Forum 783-786 (2014 May) 1967 - 1970
Amorphousization and Superconducting Property for Zr-Nb Based Alloy,
Daisuke Okai, Kentaro Mori, Gaku Motoyama, Hisamichi Kimura, Hidemi Kato ,
Materials Science Forum 783-786 (2014 May) 2503 - 2508
Existence of covalent-like bonding in Pd40Cu20Ge40 metallic glass observed by anomalous x-ray scattering,
Yamamoto, T; Hosokawa, S ; Berar, JF; Boudet, N; Pilgrim, WC; Hayashi, K; Kato, H ,
Journal of Physics: Conference Series 519(1) (2014 May) 12005
Characteristics of the Structural and Johari-Goldstein Relaxations in Pd-Based Metallic Glass-Forming Liquids,
Qiao, JC ; Casalini, R; Pelletier, JM ; Kato, H,
Journal of Physical Chemistry B 118(13) (2014 Apr 3) 3720-3730
Pronounced tensile plasticity at room temperature in a Au65Cu10.5Ag7.5Si17 metallic glass,
Qiao, JC ; Wang, H; Pelletier, JM ; Kato, H ,
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 600 (2014
Apr 10)32-36
A combination of anomalous x-ray scattering and neutron diffraction for structural characterizations of Zr63Ni25Al12 metallic glass,
Hosokawa, S; Berar, JF; Boudet, N ; Kohara, S ; Stellhorn, J; Pilgrim, WC; Zeidler, A ; Kato, H ; Kawakita, Y ; Otomo, T,
Journal of Physics: Conference Series 502(1) (2014 Apr) 12023
A metallic glass grating for X-ray grating interferometers fabricated by imprinting,
Yashiro, W; Noda, D ; Hattori, T ; Hayashi, K; Momose, A ; Kato, H ,
Applied Physics Express 7(3) (2014 Mar) 32501
Volume and Enthalpy Relaxation in Pd42.5Cu30Ni7.5P20 Bulk Metallic Glass,
Haruyama, O ; Moftate, T ; Morita, K; Yamamoto, N; Kato, H,
Materials Transactions 55(3) (2014 Mar) 466-472
Sub-micron porous niobium solid electrolytic capacitor prepared by dealloying in a metallic melt,
Kim, JW ; Wada, T ; Kim, SG ; Kato, H ,
Materials Letters 116 (2014 Feb 1) 223-226
Alloy Designs of High-Entropy Crystalline and Bulk Glassy Alloys by Evaluating Mixing Enthalpy and Delta Parameter for Quinary to Decimal Equi-Atomic Alloys,
Takeuchi, A ; Amiya, K ; Wada, T ; Yubuta, K ; Zhang, W; Makino, A ,
Materials Transactions 55(1) (2014 Jan) 165-170
Solid Argon Precipitation in a Metallic Glass: Does Free-Volume Help?,
Miyauchi, T.; Kato, H.; Abe, E.,
Materials Research Letters 2(2) (2014) 94-99
FY 2014 Presentation
2015/Mar/18-20 The Japan Institute of Metals and Materials (JIM) Annual Spring Meeting Tokyo・Tokyo Univ.
D2/Yamazaki, 「Zr基金属ガラスにおけるβ緩和とその熱活性化過程の解析」
D3/Guo,「その場NiTi増強型Mg基金属ガラス複合材料の複合組織の最適化」
Asst.Prof.Wada,「金属溶湯デアロイングによるナノポーラスシリコンの構造制御とそのリチウムイオン二次電池特性」
2015/Mar/9-10 2014 Annual Meeting of Excellent Graduate Schools for "Materials Integration Center" and "Materials Science Center" Sendai・Akiu
D2/Yu,「Porous graphite by dealloying in metallic melt」
D2/Yamazaki,「β-relaxation in Zr- and Pd-based metallic glasses studied by differential scanning calorimetry」
D3/SADEGHILARIDJANI,「Gd based metallic glass」
D3/Guo,「Mg-based metallic glass matrix composite with in situ precipitated dendritic NiTi shape memory alloy using novel processing method」
2015/Feb/26 The Japan Institute of Metals and Materials (JIM) Catalyst materials study Ibaraki・Tsukuba
Asst.Prof.Wada,「金属溶湯中デアロイングによるナノ・マイクロポーラス金属の作製とその触媒応用検討」
2014/Nov/19-21 Symposium on Batteries(55th) Kyoto
Asst.Prof.Wada,「金属溶湯中脱成分法による三次元ナノポーラスシリコンの作製とそのリチウムイオン電池負極特性」
2014/Sep/29-Oct/2 First International Symposium on Nanoporous Materials Germany・Hamburg
Assoc.Prof.Kato,「Dealloying with Metallic Melt」
2014/Sep/24-26 The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting Aichi・Nagoya Univ.
D2/Yamazaki,「Zr基金属ガラスの熱的緩和スペクトルとFragilityとの関係」
D2/Yu,「金属溶湯脱成分法を用いた3Dバルクポーラス黒鉛」
D2/SADEGHILARIDJANI,「viscosity and thermal stability of Gd based metallic glass」
D3/Tsuda,「金属溶湯脱成分法を用いて作製した多孔質Fe-Crの多孔質構造に及ぼす添加元素の効果」
Asst.Prof.Wada,「金属溶湯デアロイングによるポーラスシリコンの作製とそのリチウムイオン電池負極特性」
2014/Aug/26-27 9th International Workshop on Biomaterials in Interface Science Miyagi・Zao
Assoc.Prof.Kato,「Dealloying Toxic Ni from SUS316L Surface」