Viscoelasticity of Cu- and La-based bulk metallic glasses: Interpretation based on the quasi-point defects theory,
J.C. Qiao, Y.X. Chen, J.M. Pelletier, H. Kato, D. Crespo, Y. Yao, V.A. Khonik,Materials science & engineering. A, Structural materials : properties, microstructure and processing 719 (2018
Mar) 164-170
On the Potential of Bulk Metallic Glasses for Dental Implantology: Case Study on Ti40Zr10Cu36Pd14,
Alethea Liens, Aurelien Etiemble, Pascaline Rivory, Sandra Balvay, Jean-Marc Pelletier, Sandrine Cardinal, Damien Fabregue, Hidemi Kato, Philippe Steyer, Tais Munhoz, Jerome Adrien, Nicolas Courtois, Daniel J. Hartmann and Jerome Chevalier, Materials 11(2) (2018
Feb) 249
Optimizing Imprinting Condition for High Aspect Grating of Pd-based Metallic Glass,
Masanari DATEKYU, Wataru YASHIRO, Atsushi MOMOSE, Hidemi KATO, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 65(1) (2018 Jan) 52-56
Mechanical properties, electrochemical behavior and biocompatibility of the Ti-based low-alloys containing a minor fraction of noble metals,
Zadorozhnyy, V.Y, Kozak, D.S., Shi, X., Wada, T., Louzguine-Luzgin, D.V., Kato, H. ,
Journal of alloys and compounds 732 (2018 Jan) 915 - 921
Preparation of hierarchical porous metals by two-step liquid metal dealloying,
Wada, T., Geslin, P.-A., Kato, H, Scripta Materialia 142 (2018 Jan) 101-105
The influence of the formation of Fe3C on graphitization in a carbon-rich iron-amorphous carbon mixture processed by Spark Plasma Sintering and annealing,
Dudina, D.V., Ukhina, A.V.,Bokhonov, B.B., Korchagin, M.A., Bulina, N.V.,Kato, H., Ceramics International 43(15) (2017
Oct 15) 11902-11906
Three-Dimensional Morphological and Chemical Evolution of Nanoporous Stainless Steel by Liquid Metal Dealloying,
Zhao, CH; Wada, T; De Andrade, V; Williams, GJ; Gelb, J; Li, L; Thieme, J; Kato, H; Chen-Wiegart, YCK,
ACS APPLIED MATERIALS & INTERFACES 9(39) (2017 Oct 4) 34172-34184
Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during
high-pressure torsion at 77 K,
Jongun Moon, Yuanshen Qi, Elena Tabachnikova, Yuri Estrin, Won-Mi Choi, Soo-Hyun Joo, Byeong-Joo Lee, Aleksey Podolskiy, Mikhail Tikhonovsky, Hyoung Seop Kim, Materials letters 202 (2017 Sep) 86-88
Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys,
Jae Wung Bae, Jongun Moon, Min Ji Jang, Dong-Hyun Ahn, Soo-Hyun Joo, Jaimyun Jung, Dami Yim, Hyoung Seop Kim , Metallurgical and materials transactions. A, Physical metallurgy and materials science 48(9) (2017
Sep) 4111-4120
Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys,
Jiang, J., Ketov, S., Kato, H., Louzguine-Luzgin, D.V., Materials science & engineering. A 704 (2017
Sep) 147-153
Multiwalled carbon nanotube forests grown on the surface of synthetic diamond crystals,
Bokhonov, B.B.,Ukhina, A.V., Dudina, D.V., Katsui, H., Goto, T., Kato,H.,
Ceramics international 43(13) (2017 Sep) 10606-10609
Development of in-situ β-Ti reinforced Be-free Ti based bulk metallic glass matrix composites,
Wei Guo, Hidemi Kato, Journal of Alloys and Compounds 714 (2017 Aug 15) 120-125
Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic Glass Under Dry Friction Conditions,
Jing Guo, Soo-Hyun Joo, Dong-Hai Pi, Xiaohui Zhang, Xiaorong Zhang, Mohamed Abdelaal, Yuepeng Song, Hyoung Seop Kim, Tribology letters 65 (2017 Jun) 62
Edge-illumination x-ray phase contrast imaging with Pt-based metallic glass masks,
Saghamanesh, S., Aghamiri, S.M.-R., Olivo, A., Sadeghilarijani, M., Kato, H., Kamali-Asl, A., Yashiro, W. ,
Review of Scientific Instruments 88(6) (2017 Jun) 63705
Cold-rolling influence on microstructure and mechanical properties of NiCr - Ag composites and porous NiCr obtained by liquid metal dealloying,
Morgane Mokhtaria, Christophe Le Bourlot, Jerome Adrien, Sylvain Dancette, Takeshi Wada, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire,
Journal of alloys and compounds 707 (2017 Jun 15) 251-256
Electrochemical behavior and biocompatibility of Ti-Fe-Cu alloy with high strength and ductility,
V.Yu. Zadorozhnyy, X. Shi, D.S. Kozak, T. Wada, J.Q. Wang, H. Kato, D.V. Louzguine-Luzgin,
Journal of alloys and compounds 707 (2017JUN15) 291-297
Mechanical properties, structure, and biocompatibility of dual-axially forged Ti94Fe3Au3,
Ti94Fe3Nb3 , and Ti94Au3Nb3 alloys,
V.Yu. Zadorozhnyy, X. Shi, A.N. Kopylov, I.V. Shchetinin, T. Wada, D.V. Louzguine-Luzgin, H. Kato,
Journal of alloys and compounds 707 (2017 Jun 15) 269-274
Effect of substituting elements on thermal stability and glass-forming ability of an Al-based Al Ni Er metallic glass,
Wei Zhang, Siquan Chen, Zhengwang Zhu, Hao Wang, Yanhui Li, Hidemi Kato, Haifeng Zhang,
Journal of alloys and compounds 707 (2017 Jun 15)97-101
Fabrication and mechanical properties of bulk metallic glass matrix composites by in-situ dealloying method,
Wei Guo, Hidemi Kato, Rui Yamada, Junji Saida, Journal of Alloys and Compounds 707
(2017 Jun 15) 332-336
Development of Multi-colored Neutron Talbot-Lau Interferometer with Absorption Grating Fabricated by Imprinting Method of Metallic Glass,
Seki, Yoshichika, Shinohara, Takenao, Parker, Joseph D., Yashiro, Wataru, Momose, Atsushi, Kato, Kosuke, Kato, Hidemi, Sadeghilaridjani, Maryam, Otake, Yoshie, Kiyanagi, Yoshiaki,
JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN 86(4) (2017 Apr 15) 44001
Preparation of Nanoporous Si by Dealloying in Metallic Melt and Its Application for Negative Electrode of Lithium Ion Battery,
Wada, T., Kato, H. ,
Materials today : proceedings 4(11) (2017) 11465-11469
Morphological features of W- and Ni-containing coatings on diamond crystals and properties of diamond-copper composites obtained by Spark Plasma Sintering,
Ukhina, A; Bokhonov, B; Samoshkin, D; Stankus, S; Dudina, D; Galashov, E; Katsui, H; Goto, T; Kato, H;
Materials Today : Proceedings 4(11) (2017) 11396-11401
Phonon excitations in Pd40Ni40P20 bulk metallic glass by inelastic X-ray scattering ,
Hosokawa, S.,Inui,M.,Kajihara, Y., Ichitsubo, T., Matsuda, K.,Kato, H.,Chiba, A.,Kimura, K.,Kamimura, K.,Tsutsui, S.,Uchiyama, H.,Baron, A.,
Materials Science Forum 879 (2017) 767-772
Formation of extremely high-aspect Si sub-micron patterns with smooth wall for MEMS and X-ray devices,
Komatsu, Hayato, Yashiro, Wataru, Kato, Hidemi, Kagami, Johji, Totsu, Kentaro, Nakao, Masashi,
2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP) (2017) 487-490
FY 2017 Presentation
2018/Mar/30 Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development 2nd Meeting Osaka・Osaka Univ.
D1/Datekyu, Poster「Si金型を用いた熱インプリント加工によるPd基金属ガラス回折格子充填高さの予測と検討」
D2/Jiang, Poster「Cryogenic thermal cycling of Ti-Ni-Cu-Zr based crystal/glassy alloys」
D2/Liang, Poster「Development of imprintable Fe-based metallic glass thin films for nano-scale magnetic elements」
2018/Mar/22-23 2018 Annual Meeting of Excellent Graduate Schools for Materials Integration Center and Materials Science Center
in conjunction with 2018 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructures” Sendai・Akiu
D1/Park, Poster「Fabrication of porous carbon film by liquid metal dealloying and its characteristics as freestanding electrode for lithium-ion battery」
D1/Datekyu, Poster「Estimation and Discussion of Pd-based metallic glass grating filling depth with Si mold by resistance heating imprinting」
D2/Jiang, Poster「Cryogenic thermal cycling of Ti-Ni-Cu-Zr based crystal/glassy alloys」
2018/Mar/19-21 The Japan Institute of Metals and Materials (JIM) Annual Spring Meeting 2018(162th) Chiba・Chiba Institute of Technology
D1/Park, Oral「金属溶湯脱成分法を用いたポーラス炭素の特性に及ぼす溶湯金属元素種の影響」
D1/Datekyu, Oral「Si金型を用いた熱インプリント加工によるPd基金属ガラス回折格子充填高さの予測と検討」
D2/Jiang, Oral「Cryogenic thermal cycling of Ti-Ni-Cu-Zr based crystal/amorphous alloys」
Asst.Prof.Joo, Oral「Homogeneous or inhomogeneous dealloying behavior in grain boundary and grain interior of Fe-Co-Ni and Fe-Ni alloys during liquid metal dealloying」
Assoc.Prof.Wada, Oral「二段階金属溶湯脱合金化による階層構造ポーラス金属の作製」
2018/Feb/28 FRIS Annual Meeting 2018 Sendai・Tohoku Univ. Katahira
Prof.Kato Support Program for Interdisciplinary Research report
2018/Feb/19-20 Kick-off Symposium for World Leading Research Centers -Materials Science and Spintronics- Sendai・International Center
Asst.Prof.Joo, Poster「Development of soft magnetic Fe-Co porous using liquid metal dealloying: its microstructural evolutions and reduced core loss at high frequency」
2018/Jan/26 Joint Laboratory between Institute for Materials Research, Tohoku University & School of Material Science and Engineering, Dalian University of Technology
Workshop Sendai・IMR
Prof.Kato, Oral 「Dealloying by metallic melt」
2017/Dec/15 IMR Collaborative Research Center on Energy Materials 3rd Workshop Sendai・IMR
Assoc.Prof.Wada, Oral「金属コア/酸・硫化物シェル構造を有する共連続ナノ多孔体の開発とその多価金属二次電池正極への応用」
Prof.Kato Material Processing and Social Implementation Research Division Research report
2017/Dec/1 J・FR 2017(Journee Francophone de la Recherche) Tokyo・Ebisu
Asst.Prof.Geslin, Oral「Les methodes champs de phase : des approches numeriques pour etudier les interfaces mobiles en sciences des materiaux」
2017/Nov/29 The 134th IMR Lecture Meeting Sendai・IMR
M2/Zhang, Poster「Development of metal-organic framework modified porous vanadium and its hydrogen storage characteristics」
D2/Jiang, Poster「Thermomechanical processing of Ti-Ni-Cu-Zr based crystal/glassy alloys」
2017/Nov/21-22 KIST-Tohoku University Joint Symposium Korea・Seoul
Prof.Kato 「Nano & Sub-micron Porous Metals by Dealloying Techniques」
2017/Nov/16-17 Association of Shape Memory Alloys Symposium2017(10th) in
Matsue Shimane・Matsue
D2/Jiang, Poster「Glassy-crystal Ti-Ni basis composite with high strength and ductile」
2017/Nov/9-10 Japan Society of Powder and Powder Metallurgy Autumn meeting
2017(120th) Kyoto・Kyoto Univ.
D1/Datekyu, Oral「レーザー加熱インプリント法を用いた金属ガラス回折格子の作製」
2017/Nov/6-9 JSPM International Conference on Powder and Powder Metallurgy~60th Anniversary~(JSPMIC2017) Kyoto・Kyoto
Univ.
D1/Park, Oral「Fabrication of open-cell type porous carbon film as free-standing electrode for lithium-ion battery by liquid metal dealloying」
D2/Jiang, Oral「Impact of the thermal and mechanical processing on mechanical properties of Ti-Ni-Cu-Zr based crystal/glassy alloys」
Assoc.Prof.Wada, Oral「Formation of nanoporous Fe-based alloy by solid state interfacial dealloying reaction」
2017/Sep/29-Oct/1 2nd International Symposium on Creation of Life Innovation Materials
for Interdisciplinary and International Researcher Development (iLIM-2) Aichi・Nagoya
Univ.
D2/Jiang, Poster「Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr based crystalglassy composites」
D2/Liang, Poster「Fragility and Crystallization Behavior of Fe40Co35P10C10B5 Metallic Glass」
2017/Sep/6-8 The Japan Institute of Metals and Materials (JIM) Annual Autumn
Meeting 2017(161th) Hokkaido・Hokkaido Univ.
M2/Higuchi, Poster「ナノポーラスSi電極と錯体水素化物固体電解質を用いた全固体型リチウム二次電池の開発」
M2/Takamura, Poster「異常ネルンスト効果を用いた強磁性多孔質熱電材料の開発」
M2/Oota, Oral「気相脱成分法を用いたナノポーラスCoの作製とその触媒特性」
D1/Park, Oral「金属溶湯脱成分法を用いたオープンセル型ポーラス炭素フィルムの作製とその応用」
Asst.Prof.Geslin, Oral「Phase-field Modeling of Liquid Metal Dealloying」
Asst.Prof.Joo, Oral「Development of Fe-Co porous materials using liquid metal dealloying」
Assoc.Prof.Wada, Oral「固相脱合金化による鉄基合金ナノ構造体の作製」
2017/Aug/31-Sep/1 FRIS Retreat(2nd) Miyagi・Zao
Asst.Prof.Geslin, Oral「Phase-field modeling of coarsening by surface diffusion」
2017/Jun/25-28 2017Joint Symposium on MSE for the 21st Century Korea・ Daejeon
D2/Jiang, Poster「Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr based crystal/glassy composites」
D2/Liang, Poster「Fragility and crystallization behavior of Fe40Co35P10C10B5 metallic glass」
2017/May/31-Jun/2 Japan Society of Powder and Powder Metallurgy
Spring meeting 2017(119th) Tokyo・Waseda Univ.
D1/Datekyu, Oral「Pd基金属ガラスを用いた高アスペクト比回折格子の作製技術の確立」
2017/May/26 The 133th IMR Lecture Meeting Sendai・IMR
D1/Park, Poster「Graphitization and Activation of Open-cell Type Porous Carbon Prepared by Dealloying in Metallic Melt」
D1/Datekyu, Poster「Pd基金属ガラスを用いた高アスペクト比回折格子の作製技術の確立」
FY 2017 Invited lecture
2018/3/30 Assoc.Prof.Wada Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development 2nd Meeting Osaka・Osaka Univ. 「金属脱合金化反応を利用した多孔質金属作製と二次電池への応用」
2018/3/19-21 Prof.Kato The Japan Institute of Metals and Materials (JIM) Annual Spring Meeting 2018(162th) Chiba・Chiba Institute of Technology 「金属ガラスの緩和挙動と構造不均質性」
2018/2/27-28 Prof.Kato 6th ESISM(Elements Strategy Initiative for Structural Materials) International Workshop Kyoto・Kyoto Univ. 「Relaxation and Deformation in Metallic glass」
2017/Nov/17 Prof.Kato The Japan Institute of Metals and Materials (JIM) Tohoku Branch Meeting Akita・Akita Univ. 「金属溶湯中の脱成分反応を利用したポーラス金属の開発」
2017/Nov/6-9 Prof.Kato JSPM International Conference on Powder and Powder Metallurgy ~ 60th Anniversary ~ (JSPMIC2017) Kyoto・Kyoto Univ. 「Suppressing Ligament Growth of Porous Metals during Liquid Metal Dealloying Process」
2017/Oct/24 Asst.Prof.Joo Nobosibirsk State University Russia・Novosibirsk 「Development of Fe-Co porous materials using liquid metal dealloying」
2017/Oct/24 Prof.Kato Nobosibirsk State University Russia・Novosibirsk 「Nano & Sub-micron Porous Metals by Dealloying Technique」
2017/Oct/20 Asst.Prof.Joo Lavrentyev Institute of Hydrodynamics SB RAS Russia・Novosibirsk 「Development of Fe-Co porous materials using liquid metal dealloying」
2017/Oct/20 Prof.Kato Lavrentyev Institute of Hydrodynamics SB RAS Russia・Novosibirsk 「Nano & Sub-micron Porous Metals by Dealloying Technique」
2017/Jun/18-23 Prof.Kato 24th International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM2017) Spain・San Sebastian 「Formation and Morphological Evolution of Nano/Micro Porous Metals by Liquid Metal Dealloying」
2017/May/31-Jun/2 Prof.Kato Japan Society of Powder and Powder Metallurgy Spring meeting 2017(119th) Tokyo・Waseda Univ. 「金属ガラスの弾性、延性および擬弾性」
2017/May/27-30 Prof.Kato Helmholtz-Zentrum Geesthacht Zentrum fur Material- und Kustenforschung GmbH Germany・Hamburg 「Porous metals by selective corrosion in liquid metals and its application to lightweight and functional materials」
2017/May/15-18 Prof.Kato Mongolian University of Science and Technology Mongolia・Ulaanbaatar 「Dealloying by Metallic Melt and Its Application to Tungsten」
2017/Apr/26-28 Prof.Kato Changchun University of Technology China・Changchun 「Dealloying by Metallic Melt」
FY 2017 Awards
2018/Mar/23 D1/Park 2018 Annual Meeting of Excellent Graduate Schools for Materials Integration Center and Materials Science Center in conjunction with 2018 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructures” Poster Presentation Award
2017/Jun/2 D1/Datekyu Japan Society of Powder and Powder Metallurgy Spring meeting 2017(119th) Best Presentation Award